Instruction manual

CC5MPX Digital Camera
27
Details on the settings are as follows:
x My server requires authentication
Check off this setting if the email server requires authentication. This
usually means that a login is required, with a username and password.
x Account Name
The Account Name is required only if Authentication is used.
x Password
The Password is required only if Authentication is used.
x Sender
The EMAIL address associated with the account is normally used here.
The CC5MPX cannot receive emails.
x SMTP Server
Enter the address of the SMTP server that is being used. Enter the SMTP
server port number as part of the SMTP address, if required. The camera
will default to port 25 if a value is not included. An example of a port
number entry is: mail.server.com:587
x Email address
Enter the destination email addresses that are to receive the emails.
Multiple email addresses can be included. There is a limit of 255
characters.
For multiple email addresses, use a space, comma or semi-colon as a
separator between addresses. Ex:
[e-mail];[e-mail]
Figure 7-8 SMTP Server Settings
7.3.5 SNTP (TIME) Server Setting
Clicking on the SMTP Server Sub Tab will display the SNTP (TIME) server
settings (see Figure 7-9). The configuration of an SNTP server provides a means of
synchronizing the onboard clock of the CC5MPX with the specified SNTP server.
This ensures that the camera clock is always accurate. It is also possible to
configure a time zone offset for the camera.