Instruction manual

CC5MPX Digital Camera
30
Figure 7-11 Date and Time Settings
7.4.2 Automatic Date and Time Update
The Autmatic Date and Time submenu (see Figure 7-12) configures the camera for
automatic date and time updates. The setting parameters are:
x Time Variance in seconds to perform clock update. Select the minimum
allowable variance that will result in the camera’s time being changed.
x Source
Select 1 of 3 options for the Automatic Time updates. The possibilities
are:
*None
The camera’s clock is highly accurate and its drift is normally
less than 2 min/year.
* PakBus Port
Normally this is a datalogger. The actual time update occurs
only when a file transfer occurs to the datalogger from the camera.
*SNTP Server
The camera will use the SNTP Time server that is specified
under Network settings (see Section 7.2.5). A proper network connection
is also required. The time will update on every power up and wake out of
of sleep mode, as well as every 8 hours in Fully On mode.
Figure 7-12 Automatic Date and Time Update