Instruction manual

CC5MPX Digital Camera
31
7.4.3 Site Name
The Site Name subment (see Figure 7-13) allows a site name to be used for a
webpage heading. By default, the Site Name is set to Campbell Scientific. This
provides an easy way of confirming that the camera is connected to the web
interface. The Site Name is limited to 32 characters.
Refer to Figure 5 for the location of the Site Name on the webpages.
Figure 7-13 Site Name
Figure 7-14 Location of Site Name
7.4.4 Users and Security
The Users/Security submenu (see Figure 7-15) allow for setting of security features
in the CC5MPX.
By default, cameras are shipped with the security authentication disabled. When
the Authentication setting is set to Enable, users will be prompted for a User Name
and Password before access is given. By default, one user is set up with the user
name of Admin and the password of 9999. Ensure that a record of User names and
passwords are kept. In the event that this information is lost, and you can no longer
access your camera, the settings can be viewed or changed by connecting the
camera to a computer with the Device Configuration Utility, using the RS-232 port.
In order to add a User, you will need to fill out the ‘Add/Modify Users’ parameters,
select the required Authority level, and Submit the new User. Once the camera
Site Name