Instruction manual

CC5MPX Digital Camera
75
The zoom and focus adjustments are shown in Figure 14-2. The thumbscrews may
need to be loosened prior to moving the adjustments. It is important to tighten the
thumb screws once the camera focus and zoom adjustments are completed, to avoid
problems from vibration.
The camera controls the iris of the lens using the cable with a 4-pin connector. This
connector must always be plugged into the receptacle (on the front lens plate of the
camera) for proper operation.
Figure 14-1 CC5MPX Lens Tube Removal
Figure 14-2 Zoom and Focus Adjustments