Specifications

CC640 Digital Camera

FIGURE 15. Task using Add After to Collect Images

after Scheduled Call

Note that it is necessary to specify the directory in which the files are located

for the CR1000. In our example the USR: drive is selected. Another option is

the CRD: drive if the compact flash module is used with the CR1000.

15. Installation

The camera must be installed in an environmentally sealed enclosure that offers

protection from moisture or high humidity. It is also recommended that

desiccant be installed in the camera enclosure to absorb excess humidity.

Failure to install or replace the desiccant as required may cause malfunctions or

damage the camera.

15.1 Enclosures

Part number 15843

15.2 Mounting Holes

For flexibility, the camera is equipped with 2 different sets of mounting holes

(Figure 16). There are three ¼”-20 threaded mounting holes along the center

of the camera that are spaced 2.0” (50.8mm) apart. The setscrews need to be

removed with a 1/8” hex Allen key to use the ¼”-20 threaded mounting holes.

At least two of the ¼”-20 threaded holes are required for mounting the camera.

The camera is also equipped with four #4-40 threaded mounting holes that are

spaced 1.5” x 5.0” (38 mm x 127 mm) apart.