CD100 Mountable Display With Keypad Issued: 18.2.14 Copyright © 2011-2014 Campbell Scientific, Inc. Printed under licence by Campbell Scientific Ltd.
Guarantee This equipment is guaranteed against defects in materials and workmanship. This guarantee applies for twelve months from date of delivery. We will repair or replace products which prove to be defective during the guarantee period provided they are returned to us prepaid.
PLEASE READ FIRST About this manual Please note that this manual was originally produced by Campbell Scientific Inc. primarily for the North American market. Some spellings, weights and measures may reflect this origin. Some useful conversion factors: Area: 1 in2 (square inch) = 645 mm2 Length: 1 in. (inch) = 25.4 mm 1 ft (foot) = 304.8 mm 1 yard = 0.914 m 1 mile = 1.609 km Mass: 1 oz. (ounce) = 28.35 g 1 lb (pound weight) = 0.454 kg Pressure: 1 psi (lb/in2) = 68.95 mb Volume: 1 UK pint = 568.
Contents PDF viewers: These page numbers refer to the printed version of this document. Use the PDF reader bookmarks tab for links to specific sections. 1. Introduction .................................................................. 1 2. Cautionary Statements................................................ 1 3. Quickstart ..................................................................... 2 4. Overview ....................................................................... 2 5. Specifications ........
ii
CD100 Mountable Display with Keypad 1. Introduction The CD100 is an easy-to-read panel-mountable datalogger data display. It includes a large-format keypad for input. The CD100 is compatible with several Campbell Scientific dataloggers. Refer to Section 5. Specifications for a complete list. When properly installed, the CD100 is weather and dust resistant. As a purchased service, Campbell Scientific offers the option of installing the CD100 into an enclosure. 2.
CD100 Mountable Display with Keypad 3. Quickstart 1. If the CD100 is to be mounted into an enclosure bulkhead, refer to Section 6. Installation for instructions. 2. Using an SC12 cable as shown in Figure 1, connect the 9-pin CS I/O port of a CR1000 or other compatible datalogger to the 9-pin CS I/O port on the back of the CD100. Figure 1. Connecting the CD100 to the CR1000 Datalogger 3. Power the datalogger; the display should power up and be ready for use.
User Manual 5. Specifications Compatibility: CR800 (not CR850) CR1000 CR3000 Interface: CS I/O, SDC address 2 Temperature Operating: Storage: Transit: -45° to 85°C -50° to 85°C 1 hour at -60°C Power Requirement Source: 12 VDC from datalogger CS I/O port Current Draw Inactive: 0.
CD100 Mountable Display with Keypad Figure 2.
User Manual Figure 3.
CD100 Mountable Display with Keypad 7. Operation An overview of keyboard functions is presented in Table 1. Keyboard and Display Key Function and Figure 4. Display Menu Overview. Detailed descriptions are available in the datalogger manual. Table 1.
User Manual Figure 4. Display Menu Overview 8. Maintenance Active desiccant must be maintained in the datalogger enclosure to avoid water damage to the display electronics, the datalogger, and other contents. No other maintenance is required. Depending on the environment and weather tightness of the installation, dust may accumulate between the surface window and the underlying display elements. If this occurs, return the display to Campbell Scientific for cleaning. Do not disassemble the CD100.
CD100 Mountable Display with Keypad 8
CAMPBELL SCIENTIFIC COMPANIES Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com • info@campbellsci.com Campbell Scientific Africa Pty. Ltd. (CSAf) PO Box 2450 Somerset West 7129 SOUTH AFRICA www.csafrica.co.za • sales@csafrica.co.za Campbell Scientific Australia Pty. Ltd. (CSA) PO Box 8108 Garbutt Post Shop QLD 4814 AUSTRALIA www.campbellsci.com.au • info@campbellsci.com.au Campbell Scientific do Brazil Ltda.
