User guide

User Guide
13
Figure 15. LoggerNet Setup Tree
5.1.2 Step 2: ComPort Configuration
With the Setup tree entered, you will now need to complete the configuration of each
element. Start with selecting the ComPort element at the root of the tree (Figure 16).
Be sure that the
ComPort Connection is correct for the computer used as part of your Base Station,
and make sure that the Communications Enabled box is checked.
Under Extra Response Time and ComPort Communication Delay add 3 seconds.
Under Delay Hangup, add a delay of 200 ms. This will prevent LoggerNet from
hanging up whenever there is a slight lag in transmission time, which is common in
Satellite applications.