Specifications

RAWS-F Remote Automated Weather Station for Fire Weather
RF Out: Connects to the antenna
cable’s type N male connector.
FIGURE 5.4-1. GOES transmitter
5.4.2 Wiring, GOES Transmitter (part #TX312)
The GOES transmitter (part #TX312) is mounted inside the RAWS
environmental enclosure and the transmitter connections are described below;
GOES Transmitter TX312 Connection inside the RAWS environmental
enclosure
GOES TX312 “CS I/O” Port --to-- CR1000 PC Board “CS I/O” Port using
a *SC12 Cable
GOES TX312 “GPS Port” --to-- GPS Antenna Cable
GOES TX312 “RF Out” --to-- GOES Antenna Cable
GOES TX312 “Power Port” --to-- Battery Cable Junction Connector
*Note: The SC12 Cable ships with the RAWS Quick Deployment Weather
Station.
5.4.3 Maintenance, GOES Transmitter (part #TX312)
There are no user-serviceable parts on the GOES transmitter. No maintenance
is required.
5.4.4 Calibration, GOES Transmitter (part #TX312)
No calibration is required.
22