Product manual

RF401-series and RF430-series Spread Spectrum Radio/Modems
5.2.3 PakBus Graph
PakBus Graph is a LoggerNet utility that graphically depicts the devices and
connections in a PakBus datalogger network. In PakBus graph, the LoggerNet
server is typically represented by PakBus address 4094, and each of the
PakBus dataloggers that have been configured in Setup will be shown by the
PakBus address in brackets followed by its name assigned through LoggerNet
setup.
Because the radio networking protocols are used to direct packets, not PakBus
protocols, the network's representation in PakBus Graph may be significantly
different than one would expect. Figure 23 depicts the physical network of six
dataloggers and one LoggerNet server. Dataloggers numbered 1 and 2 route
packets to other dataloggers from the LoggerNet server.
[4] Site4
[5] Site5
[2] Site2
[4094]
LN Serve
r
[1] Site1
[3] Site3
FIGURE 23. Point to Multi-Point Network with Two Routers
This same network will be depicted in PakBus Graph as shown in Figure 24.
The radios are doing the networking, not the PakBus dataloggers.
FIGURE 24. Point to Multi-Point Network as Displayed in
PakBus Graph
35