Datasheet

SMS
File
Options Data
Tools
Help
csk.11.4.1C:R1 5M192/Sty171
F'C C:ard
SM4M1SM161.11
FCOM Port Setup
I port
CONell
COM2
COM3
C COM4
EVialcplox
Target Address
Baud Pate
Setup!, F'rograms
Dat. EraeJ
',-52UU
MI"
StatusBox
Module Pointers
Free Space
Storage Ref Pointer
Display Pointer
DumpPointer
Module Values
Good FLASH blocks
Error Count
Programs
Switch Settings
7Status Advanced...!
* Connect
I
Update Status I
L
Abort
I
(-k
(11
C
(-4
(-6
c-7
C2
r5
r ad/MIL
21
Manual
PC208W Datalogger Support Software
Step A7: Select the COM Port settings corresponding to the serial port used by the “9 to 9 pin” computer cable
connecting the SC532A Interface (see paragraph 3.1). In most cases this will be either COM1 or COM2.
Step A8: Set Baud Rate at 19200. This is a measure of the communication speed between PC and Storage Module. In
case frequent communication problems are experienced, lower the Baud Rate and see if this solves the problem.
Step A9: Click the “Connect” button to connect SM4M or SM192 to PC.
If communication is successfully established, a window similar to the one below appears. Note that the status box
is no longer empty and is now containing information on the module’s memory.