Datasheet

c....Naschwyfic - View - CACampbelltFilestOutputtmettn31.txt

File

Vie.o.e Help

All arrays

17 7

5,2001,9 7,1450,.1

5,2001,9 9,1255,.1

5,2001,9 9,1300,.1

Manual

PC208W Datalogger Support Software

This concludes the user activities in Report with respect to the extraction of 5-minute rainfall time series data from

the respective raw data input file downloaded from storage module.

For ease of reference, the above-presented steps are listed in Annex 3.

5.3.2.3 Hourly Meteorological Time Series

As in the previous, the procedure for extraction of hourly meteorological time series data is similar to the one

described in paragraph 5.3.3. The reader is referred to the above text and Annex 3 for detailed instructions on step

1 to 5 keeping in mind that in this case the parameter file “methour.par” should be used.

Steps 6 and 7 are discussed in more detail in the remaining part of this paragraph, even though these steps are

also essentially analog to the ones discussed in paragraphs 5.3.3.

Step C1-5: Perform the same actions as presented in the previous paragraph. But now use parameter file

“methour.par”.

Step C6: In the File name text box of the Select Output File sub-screen, type in the name of the output file. Apply

the following naming format: methrXX.txt

Make sure that the “XX” – serial number of the output file – is the same as of the respective raw input data file. For

instance “methr31.txt” if originating from “data031.dat”. Click OK. This process is presented in the below window.