Datasheet
Caegisdeff 5-chmitific' - View - CACampbellFilestOutputlmethattxt
File
Yievy Help
r-fF
IAll atas
71 7
5,2001,9 5,1500,27.54,2.253,1.429,2.782,1.388
5,2001,9 5,16cHD,25.86,2.239,1.095,1.423,1.38
5,2001,9 5,1700,25.75,2.222,1.094,.94,1.244
5,2001,9 5,1600,24.41,2.137,.921,.294,1.04
5,2001,9.5,1900,23.05,2.185,.634,. 044,.
5,2001,9 5,2000,21.6,2.179,.
48
5,2001,9.5,2100,20.94,2.232,.244,0,.508
5,2001,9 5,2200,20.64,2.196,. 23.5,0, . 673
5,21:11:11,9 5,2:31:11:1,21:1.1.5,2.089,.27,0,. 712
5,2001,9 5,2400,19.85,2.059,.258,0,.952
5,2001,9 6,100,19.36,2.006,. 24,0,1.228
5,2001,9 6,200,18.79,1.922,.247,0,. 431
5,2001,9 6,300,18.74,1.859,.302,0,.624
5,2001,9 6;400,18. 97,1.868,.324,0; 985
5,2001,9 6,500,18.92,1.887,.298,0,.657
5,2001,9 6,600,18.78,1.87,. 296,0,1.033
?nn
pf. 1
77 fli:
1
ri??
4 Ilk
35
Manual
PC208W Datalogger Support Software
For each full hour the Met station has been operational, the following hourly meteorological data are extracted
from raw input data file: station datalogger-ID, year, date and time, average hourly air temperature, vapor pressure,
vapor pressure deficit and wind speed; and total hourly solar radiation. The first four values (i.e. ID, year, date and
time) guarantee unique identification of each array.
The associated output file is in comma separated ASCII format. This is shown below for the output file “metrn31.
txt” referred to in the above screen; the file can be opened and viewed by Windows Explorer or any other software
capable of reading ASCII text format. In the following case the respective Output File is opened using the View utility
of the PC208W 3.3 software.
This concludes the user activities in Report with respect to the hourly meteorological data series.
5.3.2.4 Daily Meteorological Time Series
Compilation of daily meteorological information is a similar process as the one described in paragraph 5.3.3 and
5.3.4. The reader is referred to this text, and Annex 3, for detailed instructions on steps 1 to 5. In this particular case
the parameter file “metday.par” should be used.
Steps 6 and 7 are discussed in more detail in the remaining part of this paragraph, although all these steps are
essentially analog to the ones discussed in paragraph 5.3.3.
Step C1-5: Perform the same actions as presented in the previous paragraph. Use parameter file “metday.par”.
Step C6: In the File name text box of the Selected Output File sub-screen, type in the name of the output file. Apply
the following naming format: metdayXX.txt
Make sure that the “XX” – serial number of the output file – is the same as of the respective raw data file. For
instance, give the name “metday31.txt” to the output file if it is being extracted from “data031.dat”. Click OK. This
process is presented in the below given window: