Instruction manual

Model 107 Temperature Probe
the louvered construction allows air to pass freely through, thereby keeping the
probe at or near ambient temperature. The 41303-5A attaches to a crossarm,
mast, or user-supplied pipe with a 2.5 to 5.3 cm (1.0 to 2.1 inch) outer
diameter. The 41303-5B attaches to a CM500-series pole or a user-supplied
pole with a 5.1 cm (2.4 inch) outer diameter.
Tools required for installing a radiation shield to a tripod or tower include:
• 1/2 inch open end wrench
• small screw driver provided with datalogger
• small Phillips screwdriver
• UV resistant cable ties
• small pair of diagonal-cutting pliers
FIGURE 7-1. 107 and 41303-5A Radiation Shield on a tripod mast
FIGURE 7-2. 107 and 41303-5A Radiation Shield on a CM200 Series
Crossarm
41303-5A
107
Tripod Mast
or Tower Leg
CM200 Series Crossarm
41303-5A
107
Tripod Mast
or Tower Leg
7