Data Sheet

ManualsBrandsCamtec ManualsBench power supply unitsCamtec HSEUIreg04801.18T Bench PSU (adjustable voltage) 0 - 18 V DC 0 - 40 A 480 W No. of outputs 1

Camtec Power Supplies GmbH – Gewerbestraße 30 – D-76327 Pfinztal – Germany

p.1/9 06.13E

Phone 0049(721)46596-0 - Fax 0049(721)46596-77 – www.camtec-gmbh.com - info@camtec-gmbh.com

(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)

HSEUIreg04801 DIN Rail

Made in Germany

480W Programmable Power Supply

current and voltage programmable

Specification:

• Metal housing

• 90% efficiency

• -25°C...+60°C full output power

• Natural convection

• Galvanic insulated

• Continuous short circuit protected

• Overload (OVP) & low voltage protected

• Soft start & auto-recovery

• Hold up time >50ms

• No base load required

• Electronic inrush current limiter 13.8Apeak

• Analogue interface 0-5Vdc/0-10Vdc/0-20mA/4-20mA

• Real time output monitoring of voltage and current

• External shutdown

• Sense control

• Series & parallel operation

• DIN Rail 35mm & wall mount

• Screw terminals AWG20...AWG6

• High reliability, shock & vibration proof

• 24 hours burn in test

• EMI/EMS EN61000-6-2,3, EN55022 class B

• IEC(EN)60950-1 in accordance to cUL60950/16950

Available outputs:

0…18V, 0…30V, 0…50V, 0...90V, 0...130V, 0...180V, 0...240V

In accordance with IEC60950-1

Summary of content (9 pages)

PAGE 1
HSEUIreg04801 DIN Rail Made in Germany 480W Programmable Power Supply current and voltage programmable Specification: • • • • • • • • • • • Metal housing 90% efficiency -25°C...+60°C full output power Natural convection Galvanic insulated Continuous short circuit protected Overload (OVP) & low voltage protected Soft start & auto-recovery Hold up time >50ms No base load required Electronic inrush current limiter 13.
PAGE 2
AC Input AC Input Rating Rated DC Voltage 90..132Vac / 184..265Vac , 47…63Hz , 250…375Vdc 115Vac<8.8A 230Vac<4.3A 250Vdc<2.4A 375Vdc<1.6A 0...18V 0...30V 0...50V 0...90V 0...130V 0...180V 0...240V Overvoltage Protection 22Vdc 35Vdc 59Vdc 105Vdc 150Vdc 210Vdc 280Vdc Max. DC Current -25°C...+60°C 0...40A 0...24A 0...15A 0...8A 0...5,5A 0...4A 0...3A Max. DC Current +70°C 0...30A 0...18A 0...11,3A 0...6A 0...4,1A 0...3A 0...
PAGE 3
Ordering Information: Output Type (DIN-Rail standard) Part Number Built-in 5W Power Sink Part Number Option Part Number 0...18V HSEUIreg04801.18T 304.1083.001CA HSEUIreg04801.18TPS 304.1083.011CA 304.1098.001CA 0...30V HSEUIreg04801.30T 304.1083.002CA HSEUIreg04801.30TPS 304.1083.012CA 0...50V HSEUIreg04801.50T 304.1083.003CA HSEUIreg04801.50TPS 304.1083.013CA 0...90V HSEUIreg04801.90T 304.1083.004CA HSEUIreg04801.90TPS 304.1083.014CA USB 2.0 Interface UI.
PAGE 4
1) Active Transient Filter 2) Rectifier 3) Inrush Current Limiter Lighting: CV = constant voltage operation 4) Load Capacitor CC = constant current operation 5) Power Transformer SD = shutdown operation 6) Storage Choke OT = temperature failure >70°C Technical Description The HSEUIreg-Series is a programmable switch mode power supply. Engineered and manufactured in by CAMTEC in Germany, it is designed for challenging applications like railway, drives, test-stands and machine-building.
PAGE 5
Monitor Outputs SCM (fig.1) Program Inputs SCM (fig.3) Monitor Output Connections (fig.2) Program Input Connections (fig.4) (example with external poti) Monitor Outputs The monitor outputs are buffered with OP-amplifiers, preresistors & parallel connected zener diodes (fig.1). The monitor outs can be selected between +5Vdc or +10Vdc control voltage. The signal is absolute proportional to the adjusted output voltage and current. The monitor outputs are non-floating. Connections see figure 2.
PAGE 6
Series Connection (fig.1) Parallel Connection (fig.2) Series Connection (fig.1) To increase output voltage equal HSEUIreg can be connected in series. The control I/O should be galvanic insulated in the series mode. If not the minus main output is connected to the control I/O. Use our external option Isolating Transformer ADTW201 being validated with the HSEUIreg. Be aware of safety norms if your target output voltage exceeds safety voltage. Parallel Connection (fig.
PAGE 7
Power Sink (Option) The power sink option features returned power to be terminated very quickly. The power sink records the output power status and guarantees a constant output voltage. The power sink also provides quicker response time on setting down the output voltage. Applications sample: DC-drives & ATE test systems Most of modern dc-drives are controlled by a PWM (pulse wide modulation) controller. Such controllers feature a very flexible speed control and high efficiency.
PAGE 8
Coating Option We offer the USEUIreg-series with optional coating. It is to be used in e.g. dusty, dirty, high humidity, or in awaiting quick temperature changes. Short circuit and corrosion at print board lines and at solder points can be prevented. The coat itself is a transparent acrylic resin. It is procured with a robotics varnishing machine. Peters SL 1306 N-FLZ (transparent) IEC60216-1 2001, IPC-CC-830B, UL listed as permanent coating FileNo.
PAGE 9
Safety Instructions: Please read all warnings and advices carefully before installing or operating the HSEUIreg. Retain this operation manual always ready to hand.The HSEUIreg must be installed by specialist staff only. Installation: 1.) 2.) 3.) 4.