Data Sheet

ManualsBrandsCAMTEC ManualsSocket AdaptersSurge protection adapter plug

Camtec Power Supplies GmbH – Gewerbestraße 30 – DE76327 Pfinztal – Germany

p.1/5 (06.2016-02-2)

Phone +49(0)721 46596-0 - Fax +49(0)721 46596-77 – www.camtec-gmbh.com - info@camtec-gmbh.com

(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)

ESB101

Inrush Current Limiter

Inrush Current Protection

For capacitive loads, 115Vac/230Vac 16A,

16 ⅓ Hz – 440Hz,

- 40°C ... +60°C

Short Specification

• Peak- / R.M.S. current limiter

• 90-130Vac / 184-265Vac, 16A continuous

• DIN TS35mm DIN-Rail

• Wall mount (universal housing)

• Spring-type terminals 0,5-6mm² / 21-10AWG

• Integrated bypass relay

• Capacitive load 1.500uF to10.000uF

• Integrated temperature protection

• IP20 UL94V-0 housing DIN43880

for DIN/VDE0603 cutout box

The ESB is a budget-priced inrush peak

current limiter for high loads in LED-

applications, complex automation systems

and in the machine building. The ESB101

offers effective and interference free operation

with capacitive loads. It is simple to integrate

into existing equipment. The ESB101 is self-

powering and does not require an external

power supply.

Made in Germany

No simple NTC-solution! It allows to

reduce cabling sections and to install

fast circuit breakers. 100% protection

from tripping pre-installed circuit

breakers or burning relay and line

switch contacts.

16 ⅓ Hz – 440Hz

Summary of content (5 pages)

PAGE 1
Made in Germany ESB101 Inrush Current Limiter, Inrush Current Protection For capacitive loads, 115Vac/230Vac 16A, 16 ⅓ Hz – 440Hz, - 40°C ... +60°C Short Specification: • • • • • • • • • Peak- / R.M.S. current limiter 90-130Vac / 184-265Vac, 16A continuous DIN TS35mm DIN-Rail Wall mount (universal housing) Spring-type terminals 0,5-6mm² / 21-10AWG Integrated bypass relay Capacitive load 1.500uF to10.
PAGE 2
Technical Table Model Peak Current Limiting ±6% R.M.S Current Limiting ±6% Maximum Allowed Capacitive Load Limiting Time (Ton Power On) Release Time (Toff Low Voltage) Limiting Interval [Tinterval for ACcont.) Quickest advisable Circuit breaker at 30°C AC Input Range AC Continuous Input Range Line Frequency Switch-On Voltage AC Lower Margin AC Current Power Supply Current Consumption Limiting Cycles Internal Protection Cooling Operation Temp. Storage Temp.
PAGE 3
General Description The CAMTEC ESB101-series are the 2nd generation and cost-effective inrush current limiters. The limiters are made for 115/230Vac 16A networks. The line frequency range is 16⅓Hz – 440Hz. The ESB101-Limiter shall be located between the line-switcher/contactor and the load (p.2/Fig.1). The ESB-models are designed for capacitive loads (not for inductive loads like coils/transformers, not for AC-motors and not for DC-voltage application).
PAGE 4
Line voltage line voltage AC input range AC input range (Fig.3 operating range 230Vac) (Fig.4 operating range 115Vac) Design-In of the ESB101 into A/C networks The ESB101 models are the precise inrush current limiter with an overall tolerance of ±6% of the face value. For the dimension of an upstream connected circuit breaker the R.M.S is the key value of the inrush current, not the peak current. The thermal trigger point will not be met, even while using an extreme fast CB.
PAGE 5
Mechanics IP20 housing, UL94V-0 (E45329), ABS/NH6020 with RTI 110°C, housing for DIN/VDE0603 cutout box and wall mount. DIN 43880 with IEC standardized ventilation slots. Save fix on DIN-Rail TS35mm (7.5/15) DIN/EN60715. It is designed for building cabinets DIN/VDE0603. Easy to wall mount by multifunctional housing; remove the DIN-Rail latch and access the two mounting holes to screw the ESB101 to any old surface.