Camtrol, Inc.
Camtrol, Inc. USER’S MANUAL Camtrol Video Camera Stabilizing Quadpod NOTE: It is VERY IMPORTANT that you read the complete manual BEFORE you attempt to assemble or operate this equipment. CONTENTS A B C D E F G H I J K L Introduction …………………………………………………………………….… About Your New Camtrol Video Camera Stabilizing Quadpod …… Camtrol Features ……………………………………………………………….. Camtrol Acronyms and Information ……………………………………... Set Up Instructions For Installing Wired Remote Controllers …..
A—Introduction Congratulations on the purchase of your Camtrol Video Camera Stabilizing Quadpod. We are sure you will be as delighted to use it as we are proud of producing it. Your Camtrol Video Camera Stabilizing Quadpod is a major step forward in providing the quality of photography and cinematography that you would expect from a unit costing thousands of dollars. Camtrol has been developed with the two major principles that video camera stabilizers work on: Center of Gravity and Moment of Inertia.
B — About Your New Camtrol Video Camera Stabilizing Quadpod Camtrol is the latest and most modern stabilizing platform for all types of video cameras (camcorders, HD, mini DV, and high eight) and new DSLR’s/video cameras with adjustable LCD screens. Its uniquely engineered features combine to form a versatile tool that allows the user to capture images from any angle.
C – Camtrol Features Camtroller ACG RP/RA VSB VLBJ (Qty 3) QPS QPRL (Qty 4) Figure 1 Camtrol Feature Acronyms and Information D – Camtrol Acronyms and Information ACG (Action Control Grip) ACG allows for an Anatomical True Feel. ACG provides controlled maneuverability and camera handling while maintaining that natural and unrestricted Grab n Shoot sensation.
E- Set Up Instructions For Installing Wired Remote Controllers Follow set up instructions #1-12 if using a wired LANC or other manufacturer’s wired remote controller. If not using a wired remote controller, go to step #13. Set Up Instructions 1) Using a Phillips screw driver, remove two screws on either side of ACG. Set aside for use in a later step. 2) After screws are removed, slide out RP/RA. Set aside for use in a later step.
E- Set Up Instructions For Installing Wired Remote ( Continued ) 4) Slide Camtroller Lanc connector through the ACG and out the hole in the side of the ACG Slide connector out the opening in the side of the ACG Slide connector and cable in the opening of the ACG Figure 3 Installation of Camtroller Cable 5) Install Camera onto Camtrol Landing Pad by installing thumb screw into tri-pod on camera.
E- Set Up Instructions For Installing Wired Remote ( Continued ) 9) Wrap remaining Camtroller Cable around a pencil or Pen to coil as shown 10) Feed into handle as shown, remove pencil and push coiled cable into handle. 9 & 10. Excess cable wrapped on pencil Figure 5 Camtrol Cable Installation 11) Re-install handle top 12) Re-install two screws. 13) Decide which shooting configuration you want to use.
F- Shooting Configuration-Camtrol Prime Position Controllers Freedom to Create This prime position allow you to shoot mid low angle shots, low angle shots, moving low angle shots, tail way shots, following shots, and dolly shots. You can use multiple camera mounting options creating unlimited angles. This position also permits moving the ACG(Action Control Grip) to arrive at the perfect center of gravity for stable and effortless shooting.
H - Shooting Configuration-Above the Crowd Extreme High Mounting Angle(EHMA) Use left hand under QPSP(Quad Pod Skid Plate) to support while positioning grip and VSB(Vertical Stabilizing Bar) for centering weight in hand so it is easy to control and maneuver. This configuration is for those extreme high moving angle shots over obstacles. Figure 9 Above the Crowd Shot Over the head shooting/ use two hands with this configuration. Practice at home before using elsewhere..
J - Shooting Configuration-Round the Corner Corner Shots? Around obstacles for stealth shooting /:paparazzi? Use multiple camera mount options and ACG(Action Control Grip) remote options. When feel heaviness release legs and set down or switch hands on grip. Use second hand to support plate to provide stability. Figure 11 Around the Corner Used for shooting around an obstacle or object. Use two hands.
K - Warranty and Warnings (Continued) Camtrol, LLC(Camtrol) warrants solely to the original purchaser that its Camtrol stabilizing unit will be free from defects in materials and workmanship ,under normal conditions of use and service, for one year and 6 six months for labor based on the date of original purchase. The original invoice shipped with the product must be retained as proof of purchase and will be required to process any and all warranty claims.
