Specs

ISO 9001:2008 / Quality management system
ISO 14001:2004 / Standards for environmental management system
OHSAS 18001:2007 / International standards for occupational health & safety
product warranty on materials
and workmanship
linear power output warranty
IEC 61215 / IEC 61730: 2005: VDE / CE
UL 1703: CSA
KEY FEATURES
PRODUCT CERTIFICATES*
MANAGEMENT SYSTEM CERTIFICATES*
Safer: lower hot spot temperature
Low power loss in cell connection
Heavy snow load up to 5400 Pa,
wind load up to 2400 Pa
More power output thanks to low NMOT: 42 ± 2 °C
With Canadian Solar’s innovative module technology and
Mono-PERC cell technology, we will offer our customers
high power modules up to 330 W with enhanced aesthetics
appearance. Through maximizing the light absorption area
and removing the loss of ribbon resistance, the module
eciency can reach up to 19.45 %.
The mono modules with a dimension of 1710 ˣ 992 mm, close
to our 60 cell modules, have the following unique features:
• Higher power classes for commercial solar systems
• High module eciency up to 19.45 %
• Maximize the light absorption area
• LOW hot spot temperature risk
• LOW temperature coecient (Pmax): -0.37 % / °C
• LOW NMOT (Nominal Module Operating Temperature):
42 ± 2 °C
HDM
HIGH EFFICIENCY
MONO PERC MODULE
CS1K-315|320|325|330MS
Preliminary Technical
Information Sheet
*For detail information, please refer to Installation Manual.
CANADIAN SOLAR (USA), INC.
3000 Oak Road, Suite 400, Walnut Creek, CA 94597, USA | www.canadiansolar.com/na | [e-mail]
is committed to providing
high quality solar products, solar system solutions and
services to customers around the world. As a leading
PV project developer and manufacturer of solar modules with
over 22 GW deployed around the world since 2001,
Canadian Solar Inc. (NASDAQ: CSIQ) is one of the most
bankable solar companies worldwide.
CANADIAN SOLAR (USA), INC.
* As there are different certication requirements in different markets, please
contact your local Canadian Solar sales representative for the specic certicates
applicable to the products in the region in which the products are to be used.