Specification

Owners Manual
The Default Heating Mode is Standard Mode. Move Down and Touch
Right or Select to Open the Heating Mode Set Menu. To change to this
Heating Mode, Touch Select , or to Exit back, Touch Left .
Set the Filter Cycles - The Filter Cycles determine when the Filter
Pump will turn On to Filter the Water. The Default is two 2 hour Filter
Cycles every day of the week, 12 hours apart. You can Set up to four
Filter Cycles on any days of the week, and with any Start Time and
Duration you want. The Filter Cycle Days and Time also determine
when the Heating will take place in the Economy and Vacation
Heating Modes. In these Modes, the Heater will only operate during
the Filter Cycle Filtration times, and will not operate between Filter
Cycles.
To Set the Filter Cycles, in Navigation Mode, with Settings
Highlighted, Touch Select to Open the Settings Menu. Scroll Down ,
and with Filter Cycles Highlighted, Touch Select or Right to Open the
Set Filter Cycles Menu.
By Default, Filter Cycle 1 & 2 are turned On and Preset. To turn On or
turn Off a Filter Cycle, with that Filter Cycle Highlighted, Touch Select .
If the Filter Cycle is Set to Off, the System ignores the Days and Times
Set, and the Filter Cycle is Disabled. To Change the Days and Time for
Filter Cycle 1 or to Set or Modify other Filter Cycles, Scroll Down to
the Filter Cycle, then Move Right to the Filter Cycle Setting Menu. Use
the Up , Down , and Right Buttons to Change or Set the Start Time,
Duration, or Filter Cycle Days. Touch Left to Exit back to the Set Filter
Cycles Menu, or Touch Back Home to Exit to the Home Screen.
Turn On The Information Slideshow - The Information Slideshow
can be turned On to display a Slideshow that has been provided
by the Spa Manufacturer or Dealer. If the Information Slideshow
is turned On, it will stay On until the Left or Back Home Button is
Touched, or until the Display turns Off.
To turn On the Info Slideshow, in Navigation Mode; with Settings
Highlighted, Touch Select to Open the Settings Menu. Scroll Down ,
and with the Info Slideshow Menu Bar Highlighted, Touch Select to
Start the Info Slideshow.
Touch Left to End the Info Slideshow and Exit back to the previous
Menu, or Touch Back Home to return to the Home Screen.
Set Fahrenheit or Celsius - Your Water Temperature can be Set to
display in either Degrees Fahrenheit or Degrees Celsius. The Default
is Degrees Fahrenheit.
To toggle back and forth between ºF and ºC Temperature display, in
Navigation Mode; with Settings Highlighted, Touch Select to Open
the Settings Menu. Scroll Down , and with ºF / ºC Highlighted, Touch
Select to Toggle between °F and °C. Touch Back Home to return to
the Home Screen.
Set Reminder Messages - The Reminder Messages Pop-Up period-
ically to Remind you to perform the Normal Maintenance required for
your Spa. They are all set to Pop-Up at various intervals from 7 Days
to 1 Year, but you can change any of them.
To Set the Reminders, in Navigation Mode, with Settings Highlighted,
Touch Select to Open the Settings Menu. Scroll Down , and with
Reminders Highlighted, Touch Select or Right to Open the Set Re-
minders Menu.
Scroll Down to the desired Message you want to Change or turn Off,
then Touch Select or Right to Open the Set Reminders Menu for that
Reminder Message. To turn the Pop-Up Reminder Message interval
Off or On, Touch Select . To change to a different interval, scroll to the
desired interval and Touch Select to turn it On. To Exit back, Touch
Left . If there are no intervals Set to On, the Message will never
Pop-Up. When a Pop-Up Reminder Message appears on your Screen,
you can Touch any Button to return to the previous Screen.
Change to a Different Home Screen - There are two different Home
Screensavailable. The first Screen is the Standard Logo Home Screen
which is a full Display with Company Logo, Time, Water Temperature,
and Information Icons to show if the Spa Equipment is turned On
or Off. The Second Screen is the Time & Temp Home Screen which
is a simplified Display that only displays a Large Time and Water
Temperature.
Spa operation - Azure i262 CS Control Panel