Specification

Owners Manual
25
How to Guide
STEP 1 - Unscrew side panels to
access pump on the fascia with air
vent and the MP3 Player housing
STEP 2 - Remove panel strips and
side panels on the ‘touch pad ‘side
STEP 3 - Shut down slice valves
either side of control box.
STEP 4 - Unscrew face plate of
control box using screwdriver
STEP 5 - Unplug sensors plug from
circuit board - Pinch tab down
before pulling out plug.
STEP 6 - Unscrew heater nuts
using 3/8 inch+9 wrench
underneath copper jumper and hold
in place while unscrewing top nuts
using a 6 mm spanner
STEP 7 - Unscrew both locking
nuts on heater from brackets using
6 mm spanner
STEP 8 - Undo left and right side
heater unions using large grips
STEP 9 - Remove gaskets from
plumbing and fit new ones from
new heater
STEP 10 - Install new heater.
STEP 11 - To re-assemble reverse
the above sequence
HOW TO CHANGE A HEATER ON A CANADIAN SPA HOT TUB
TOOLS NEEDED: Drill, Phillips CH3 screwdriver, 13mm spanner head, Grips, 6mm wrench 3/8 Wrench.
IMPORTANT: SWITCH OFF ELECTRICAL SUPPLY BY DISCONNECTING THE PLUG AT THE SOCKET OR ISOLATION SWITCH. Please contact a
qualified electrician if you need assistance or contact us at Canadian Spa