Specification

Owners Manual

How to Guide

STEP 1 - Remove panels below

Touch pad (to get access to MP3

panel housing on/off button)

STEP 2 - Unscrew nut and then

unplug on/off connection from

ampliﬁer

STEP 3 - Remove wiring from MP3

housing.

STEP 4 - Disconnect power supply

lead from ampliﬁer by pulling plugs

apart.

STEP 5 - Cut Black/Red and Red

wires on ampliﬁer wires.

STEP 6 - Unscrew ampliﬁer from

cabinet.

STEP 7 - Re-screw NEW ampliﬁer

onto cabinet

STEP 8 - Remove insulation cover

from wires.

STEP 9 - Insert wires into 5A

connection blocks (Red to Brown

and Red/Black to Grey).

STEP 10 - Insulate tape connector

and wire

REPLACE AN AMPLIFIER ON A HOT TUB

TOOLS NEEDED: Drill, Phillips CH3 screwdriver, Wire cutters, insulation tape, 4 x 5A connection strips, small ﬂat screwdriver.

IMPORTANT: SWITCH OFF ELECTRICAL SUPPLY BY DISCONNECTING THE PLUG AT THE SOCKET OR ISOLATION SWITCH. Please contact a

qualiﬁed electrician if you need assistance or contact us at Canadian Spa