Specification

Owners Manual
24
How to Guide
STEP 1 - Unscrew side panels to
access pump on the side with air
vent and the MP3 Player housing
STEP 2 - Remove panel strips and
side panels (on the ‘touch pad ‘
side)
STEP 3 - Uncouple on/off switch
to MP3 allowing you to remove the
panel away from the spa and gain
access to the pump.
STEP 4 - Shut down both slice
valves to isolate water
STEP 5 - Unscrew Control pack
cover using a Phillips screwdriver
STEP 6 - Remove clamp to wire
- unplug pump plug from circuit
board (ensure cable ties are
removed from plumbing)
STEP 7 - Unscrew earth wire from
pump (ensure wire is moved safely
away from pump area)
STEP 8 - Remove all 4 nuts from
pump base using a 51/8”(13mm)
wrench
STEP 9 - Undo pump union joints
using an oil filter grip (available at
large hardware retailers).
STEP 10 - Lift pump off the 4 screw
pump base and replace with NEW
pump ensuring the screw heads are
aligned with pump holes
STEP 11 - To re-assemble reverse
the above sequence
HOW TO CHANGE A PUMP ON A CANADIAN SPA HOT TUB
TOOLS NEEDED: Phillips CH3 screwdriver, 51/8”(13mm) spanner head, oil filter grip (available at large hardware retailers), Wire- cutters.
IMPORTANT: SWITCH OFF ELECTRICAL SUPPLY BY DISCONNECTING THE PLUG AT THE SOCKET OR ISOLATION SWITCH. Please contact a
qualified electrician if you need assistance or contact us at Canadian Spa