User's Manual

Canam Technology, Inc. (CTI)
MARK-IV CHANNELIZED (Class A Narrowband) SIGNAL BOOSTER WITH AUTOMATIC
OUTPUT LEVEL CONTROL M4-ChOLC
User’s Operations and Maintenance Manual (O&M)
C.6 MARK-IV MODULE SPECIFICATIONS
MARK-IV Channelized (Class A Narrowband) Signal Booster module
with Automatic Output Level Control – model M4-ChOLC
• Channel Specs
Frequency range:
a. M4-ChOLC-800UL FCC ID: TCJM4-ChOLC-800UL
b. M4-ChOLC-800DL FCC ID: TCJM4-ChOLC-800DL
c. M4-ChOLC-UHF FCC ID: TCJM4-ChOLC-UHF
a: 806 – 824 MHz
b: 851 to 869 MHz
c: 460 to 490 MHz
Frequency Programming Steps 12.5 kHz
Channel Spacing 25 kHz
• RF Input
Input impedance (typ) 50 ohms
Sensitivity for greater than 20 dB output SINAD (DAQ 3.4) -90 dBm
Maximum input power (composite) for no-damage -10 dBm
• RF Output
Output impedance (typ) 50 ohms
Output power (maximum)
a. M4-ChOLC-800UL FCC ID: TCJM4-ChOLC-800UL
b. M4-ChOLC-800DL FCC ID: TCJM4-ChOLC-800DL
c. M4-ChOLC-UHF FCC ID: TCJM4-ChOLC-UHF
0 dBm
-2 dBm
-5 dBm
Output level adjustment range 10 dB
Maximum output level variation with input level variations within range +/- 2 dB
Distortion ≤ 4%
Spurious & harmonics outputs < -13 dBm
Duty cycle Continuous
• Field Adjustments and Status Indicators
Operating Frequency (serial port interface)
Input (Rx) Threshold level
Output Power level
RF output OK signal (open-collector, “fail-safe” indication)
DC current draw OK signal (open-collector, “fail-safe” indication)
Receive Signal Strenght Indicator – RSSI (DC voltage)
• Power Requirements
Power Supply +15 VDC
Power Consumption 10 W max.
• Environmental
Operating Temperature range 0° to 50° C
• Mechanical
Module footprint (typical) 273x234x27.2 mm
RF coaxial connectors are “SMA” type, female.
MARK-IV CHANNELIZED Signal Booster module (M4-ChOLC) O&M Manual Page 9 of 20