User's Manual

Canam Technology, Inc. (CTI)
MARK-IV CHANNELIZED (Class A Narrowband) SIGNAL BOOSTER WITH AUTOMATIC
OUTPUT LEVEL CONTROL M4-ChOLC
User’s Operations and Maintenance Manual (O&M)
Section D. INSTALLATION
D.1 Equipment Installation
The mechanical drawing is shown in Figure 6. The M4-ChOLC can be installed in several
forms:
a. Up to 14 units can be mounted vertically in a 6RU standard card-cage.
b. Up to 2 units can be mounted horizontally in a 1RU shelf.
c. The modules could also be stack up in a wall-mount enclosure, according to the
costumer’s needs.
Canam Technology’s Equipment is factory configured. All setup and wiring is performed by
Canam’s Personnel. There is no need to disconnect the equipment unless the units should
be serviced.
Warning: if any module should be disconnected, it should only be done by qualified
technical personnel.
Figure 6: M4-ChOLC Mechanical Specifications (Units in mm)
MARK-IV CHANNELIZED Signal Booster module (M4-ChOLC) O&M Manual Page 10 of 20