User's Manual

MARK-IV BROADBAND AMPLIFIERS
User’s Manual
8 / 11
REV3 01/25/06
Section E. INSTALLATION
E.1 Equipment Installation
Canam Technology’s Equipment is factory configured. All setup and wiring is performed
by Canam’s Personnel. There is no need to disconnect the equipment unless the units
should be serviced.
Warning: if any module should be disconnected, it should only be performed by qualified
technical personnel.
RF-INPUT
6.370
6.173
3.039
0.433
0.098
3.320
3.123
2.865
0.575
LED
0.528
0.433
1.779
1.024
Ø0.134 THRU
4 PL
0.098
FORWARD
REVERSE
ALC ON/OFF
ALC LEVEL
REMOTE
MUTE
+VDD
+VDD
GND
GND
1
2
3
4
5
6
7
8
9
RF-INPUT
RF-OUTPUT
LED
Figure 1: MARK-IV BBDA 800 MHz-band Mechanical Outline (Units in inches)