User's Manual

CANAM TECHNOLOGY, INC. (CTI)
MARK-IVD 700MHZ NARROWBAND SIGNAL BOOSTER M4DBDA7 USER’S MANUAL
Page 10 of 11
Rev0 August/2012
D.2 USING AND SETTING UP D.U.T
1. Open a web browser and access the equipment by typing, in the
address bar, the IP address ( http://192.168.100.87 ) assigned to the
equipment.
o Login with username = factory, password = factory.
o The Main Status page will be displayed if connection available.
2. Go to Calibration page for:
o Changing meters calibration, settings such as “Local Oscillator”,
minimum readable for some meters.
3. Go to Filter Settings page for:
o Configuring the center desired frequencies.
o Enable/disable filter windows.
o Setting other filters attributes as Fine-Tune, Rx Threshold,
Enable/disable AGC.
4. Go to Main Settings page for:
o Changing “Maximum Desired Output Level per Filter”.
o Enabling/disabling MCPA output per path.