Installation Instructions

ManualsBrandsCanarm ManualsBuilding materials16" 3 Speed XFS Series Exhaust Shutter Fan

Installation or Product problems? Do not return to store of purchase.

Contact Canarm Service at 1-800-267-4427 (U.S.A.)

Monday to Friday 8:00 - 5:00pm e.s.t.

“

WARRANTY

CANARM Ltd. warrants every new fan to be free of defects in material and workmanship, to the extent that, within

a period of one year from the date of purchase CANARM Ltd. shall either repair or replace at CANARM’s option,

any unit or part thereof, returned freight prepaid, and found to be defective.

This warranty does not include any labour or transportation costs incidental to the removal and reinstallation of

the unit at the user’s premises.

Components repaired or replaced are warranted through the remainder of the original warranty period only.

This warranty applies to the original purchaser-user only; it is null and void in case of alteration, accident, abuse,

neglect, and operation not in accordance with instructions.

NOTICE: No warranty claims will be honored by CANARM Ltd. unless prior authorization is obtained.

XFS-R-M 040714 Page 1 of 4

Summary of content (4 pages)

PAGE 1
“ WARRANTY CANARM Ltd. warrants every new fan to be free of defects in material and workmanship, to the extent that, within a period of one year from the date of purchase CANARM Ltd. shall either repair or replace at CANARM’s option, any unit or part thereof, returned freight prepaid, and found to be defective. This warranty does not include any labour or transportation costs incidental to the removal and reinstallation of the unit at the user’s premises.
PAGE 2
Instruction Manual for “XFS” Light Commercial Wall Exhaust Fans Read Instructions Completely Before Installation & Save for Reference Congratulations on the purchase of your quality built direct drive, wall exhaust ventilation fan. Used for general exhaust ventilation, these fans come fully assembled and 100% of fans are tested for proper operation before shipping. “XFS” Exhaust Fans: These models have a rugged, welded steel box housing with a powder coated finish and aluminum exhaust louvers.
PAGE 3
Instruction Manual for “XFS” Light Commercial Wall Exhaust Fans Read Instructions Completely Before Installation & Save for Reference PRE-START INSPECTION 1. Ensure the guard and louvers are installed properly. Open the louvers see if they are operative. 2. Lock out all power sources. 3. Confirm power source voltage and motor voltage (115V) are the same. 4. Inspect that the fan is properly installed, and proper seal is applied around the wall opening. START UP The fan has a cord and grounded plug.
PAGE 4
Instruction Manual Light Instruction Manualfor for “XFS” “XFS” Light Commercial WallExhaust Exhaust Fans Fans Commercial Wall “ Read Instructions Completely Before Installation & Save for Reference Read Instructions Completely Before Installation & Save For Reference ! WARNING Moving parts, disconnect power before servicing. WARNING: FAN IS GUARDED ON INTERIOR. EXTERIOR SHOULD BE MOUNTED AT LEAST 8’3 ABOVE GRADE LEVEL OR PROPERLY GUARDED FROM ACCIDENTAL CONTACT OF THE BLADE THROUGH THE LOUVERS.