Installation Sheet

L
N
INSTALLATION:
BRWL-SH10T-N
04/17
SAFETY PRECAUTIONS:
EASY CONNECT®
INSTALLATION INSTRUCTIONS
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
NOTE: Product may not look exactly as shown in figures.
Fixture
Option 1
Option 2
Black (Live)
White
(Neutral)
Green (Ground)
Easy Connect
mounting
bracket
(L)
Black
(Live)
(L)
Black (Live)
(L)
Black (Live)
(N)
White
(Neutral)
(N)
White
(Neutral)
(N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Jumper Wire
Jumper Wire
Electrical
box screws
1. Unscrew the cap nuts
to remove the mounting
plate and mounting
bracket from the fixture.
Unscrew the hex nuts to
release the mounting
bracket from the mounting
plate.
2. Attach easy connect
mounting bracket to
electrical box with
electrical box screws
(not included).
3. Option 1: Connect
(push) electrical wires from
electric box (house wiring)
into correct inserts.
Option 2: For multiple
green (ground), black (live)
and white (neutral) wires
joined in the electrical box
(house wiring), attach a
single “green”, “black” and
“white” jumper wire before
connecting. Strip 7mm
from a 6 in. jumper wires
(AWG 12-24) supplied. Then
connect (push) wires into
the correct inserts.
4. Feed power cords
from the fixture through
the center hole of the
mounting plate. Connect
(push) electrical wires from
fixture into correct inserts.
5. Tuck electrical wires
into electrical box and
reverse step 1 to re-install
the fixture.
6. After Installation, seal
around the top and side
perimeter between the
fixture and the wall
surface with weather
resistant caulking. The
bottom should be left
un-caulked to prevent
moisture build-up. Apply a
small amount of weather
resistant caulking around
the side perimeter
between the cap nut and
mounting plate.
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY
A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
A CLEAN, SOFT CLOTH.
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
Tel: [phone], Fax: [phone]
Wheather
Resistant
Caulking
(not included)
Cap
Nut
Electrical
Box
L
N
L
N
L
N
L
N
Mounting
plate
Cap
Nut
Rubber
Washer
Hex Nut
Mounting
plate
Fixture
Ground wire
Easy Connect
mounting
bracket
Fixture
Ground wire