Instructions / Assembly

Pg. #3
Pg. #10
8.
WARNING: Ensure that all connections, set screws and screws are
securely tightened before the next step.
To clean the fixture, turn off the power, wait for it to cool, and wipe the
fixture with a clean, soft cloth.
LIGHT KITS
1. Wooden Joist
2. Approved (CSA for Canada
and UL for U.S.) ceiling fan box
(not provided)
3. Ceiling
4. J-Hook
5. Rubber Gasket
6. Screws & Lock Washers
(set of 4)
7. Mounting Bracket c/w Ground
Wire
8. Outlet Box Screws (not provided)
9. Rubber Ring
10. Lock Pin
11. Hemisphere Jam Screw
12. Hemisphere
13. Upper Motor Housing Screws
& Lock Washers
14. Downrod c/w Ground Wire
15. Ceiling Canopy
16.
Rubber Bushing
17.
Bolt
18.
Motor Assembly
19.
Jam Screws
20.
Cotter Pin
21.
Flat Washer
22.
23.
With Downrod
Without Downrod
1.
2.
3.
4.
5.
6.
7.
8.
ASSEMBLY DRAWING
Yoke Cover
25.
26.
Flat Washer
27.
Fibre Washer
28.
Blade
24.
29.
Motor Screw & Lock Washer
Blade Bracket
24.
25.
26.
28.
29.
27.
Fig.1
10.
11.
12.
13.
14.
15.
18.
15.
17.
19.
20.
21.
22.
9.
19.
16.
23.
Blade Bracket
Screws
Light Kit
Motor
Light Kit
Diffuser
Fig.10c
Diffuser
Light Kit
Motor
Screw
Light Kit
Fig.10d
Fig.10e
Install the guard to the light kit by the tightening 2 screws and washers.
Screw the diffuser to the light kit.
Guard
TROUBLESHOOTING
TROUBLE
SUGGESTIONS
1. Fan will not start
- Check wiring connections in switch housing.
CAUTION: Turn power off for last two items.
Check wiring connections to fan.
-
- Check fuses and circuit breakers.