Instructions / Assembly

Reference Numbers:
1. Upper Canopy 11. Steel Frame Ceiling
2. Set Screw 12. J-Hook Nut
3. Blade Mounting Screw 13. Spring Washer
4. Blade Bracket 14. Washer
5. Fan Blade 15. Threaded J-Hook
6. Vibration Absorber 16. Safety Cable
7. Spark Plate (NA for Cord & Plug) 17. Lead Wires (or Cord & Plug)
8. Lower Canopy 18. Downrod
9. Blade Mounting Spring Washer 19. Eye Bolt
10. Motor Head 20. Junction Box (Not provided)
Figure 1
Figure 2
RED
RED
BLUE
BLUE
WHITE
WHITE
BLACK
BLACK
120 VOLTS SUPPLY
120 VOLTS SUPPLY
BLACK
BLACK
WHITE
WHITE
GREEN
GREEN
2
1
5
46
3
MOTOR
MOTOR
MOTOR
MOTOR
RED
RED
WHITE
WHITE
BLACK
BLACK
BLUE
BLUE
RED
RED
BLUE
BLUE
YELLOW
YELLOW
WHITE
WHITE
BLACK
BLACK
WHITE
WHITE
120 VOLTS SUPPL
Y120 VOLTS SUPPLY
CNFRMC5
CNFRMC5
GREEN
GREEN
Both Updraft & Downdraft
Using Canarm CNFRMC5 Control
MODELS: CP36, CP48, CP56S, CP56BR, CP56F/R
HIGH PERFORMANCE MODELS: CP48, 56, 60 HPWP & AG
BLACK
BLACK
WHITE
WHITE
RED
RED
BLUE
BLUE
WHITE
WHITE
BLACK
BLACK
120 VOLTS SUPPL
Y120 VOLTS SUPPLY
GREEN
GREEN
MOTOR
MOTOR
BLUE
BLUE
BLACK
BLACK
WHITE
WHITE
RED
RED
WHITE
WHITE
BLACK
BLACK
120 VOLTS SUPPL
Y120 VOLTS SUPPLY
GREEN
GREEN
MOTOR
MOTOR
MODELS: CP36, CP48, CP56S, CP56BR, CP56F/R
HIGH PERFORMANCE MODELS: CP48, 56, 60 HPWP & AG
Figure 3
• TROUBLESHOOTING •
Trouble: Suggestion:
1. Fan will not start. - Check fuses and circuit breakers
- Check wiring connections to fan.
- Check wiring connections in lower canopy.
Caution: Turn power off for last two items.
2. Fan sounds noisy. - Check to make sure all screws in
motor are snug.
- Check to make sure that all blade
bracket screws are tight.
- Some motors are sensitive to signals
from solid state variable controls. If this
type of control is used some electrical
noise from the motor is normal and will
not effect performance.
For quiet operation use Canarm’s
models CQ004 “Church Quiet” controls.
- Allow a 24 hour break in period to
eliminate most noises.
3. Fan wobbles. - Check that all blades are screwed firmly
to motor.
- Check distance from tip of blades to
ceiling, gently bend up or down until all
distances are the same.
- Make sure upper canopy is 1/8” from
ceiling.
- Make sure that hanging hooks are
secured tightly to ceiling.
Page 2 of 3
Downdraft
MODELS: CP36, CP48, CP56S, CP56BR, CP56F/R
HIGH PERFORMANCE MODELS: CP48, 56, 60 HPWP & AG
Updraft
MODELS: CP36, CP48, CP56S, CP56BR, CP56F/R
HIGH PERFORMANCE MODELS: CP48, 56, 60 HPWP & AG
Both Updraft & Downdraft
Using Canarm MC Series Control and DPDT Switch
Note: On the Double Pole, Double Throw Switch,
Jumper Pin 1 to 4, 3 to 6
1
4
3
6
2
5
POTENTIOMETER
CNFRMC5
CONTROL
DPDT SWITCH
MC SERIES
CONTROL
(if applicable)
MC SERIES
CONTROL
(if applicable)