Specification

HIGH PERFORMANCE CEILING FANS
MODEL: CP60HPWP
Features
Performance Data & Specifications
Ratings
CEILING FAN SPEED CONTROLS
MODELS: “MC” CONTROL & “FRMC5” CONTROL
“MC” CONTROL
24.375”
7.6”26”
• Engineered and designed for spacious applications where maximum floor coverage is required.
• Reversible motor for both winter heat destratification and summer time cooling.
• All fans are sealed and suitable for high moisture applications.
• Designed for above average area coverage and cooling velocity.
• Variable speed motor (all motors are impedance protected, PSC type variable speed with permanently lubricated ball bearing motors).
• When used with our MC series speed controls the speed range is infinite.
Model Number Fan Size Max RPM
Air Velocity 5'
from fan
Air Delivery
@ floor
Amps High Watts High
Downrod
Length
Shipping
Weight (Lbs.)
CP60 HPWP 60" 292 650 ft/min 46,000 cfm 0.84 101 16" 24.65
Model Number Max # of Fans/control Variable Speed Operation Power Supply Ampere Rating
MC-3 2 2.5
MC-5 4 5.0
MC-10 8 10.0
MC-15 12 15.0
FRMC5 4 Manual c/w Forward/Reverse Switch 5.0
120V/1/60HZ
Manual
CANARM LTD. - Corporate Office
2157 Parkedale Ave., Brockville, ON
Canada K6V 5V6
Tel: [phone] Fax: [phone]
CANARM LTD. - USA Warehouse
808 Commerce Park Drive
Ogdensburg, New York, USA 13669
Tel: [phone] Fax: [phone]
www.canarm.com E-Mail: [e-mail]
Arthur Manufacturing Facility
#7686 Concession 16, RR 4 Arthur, ON
Canada N0G 1A0
Tel: [phone] Fax: [phone]
HEAVY DUTY • HIGH PERFORMANCE • MAXIMUM OUTPUT
OCTOBER, 2010
Subject to change without notice. 10/10
• Available in 4 models: 3 amp, 5 amp, 10 amp and 15 amp.
• The MC15 can operate up to 12 fans on a single control.
• Infinite speed adjustment
• Minimum speed adjustment screw.
• Designed to fit a standard 3” x 5” electrical box.
• Mount in a dry location such as the control room.
• A slide switch is provided to change the direction
of the fan from updraft to downdraft.
• 5 amp rating for all reversible models.
• Up to 4 fans can operate on a single control.
• Infinite speed adjustment.
• Minimum speed adjustment screw.
• Designed to fit a standard 3” x 5” electrical box.
• Mount in a dry location such as the control room.
OFF
HIGH
LOW
OFF
HIGH LOW
“FRMC5” CONTROL