Product Manual

FIGURE 14
TRI-LITE HVLS SERIES FANS
TRI-LITE HVLS-M (04_29_15) Page 8 of 13
FINAL STEPS
IMPORTANT LEVELLING INSTRUCTIONS:
After your fan is installed, check the level again by placing your
level vertically on the side of the fan frame.
If adjustment is needed slightly tighten the guy wire on the
appropriate side.
Once levelled your fan is installed and ready for electrical
installation / connection.
For proper electrical connection, please consult the motor
wiring diagram (supplied with the motor).
WP Fan Package
16’, 24’
Packaged Extension Mount
2’, 4’
HVLS-MBX2, HVLS-MBX4
WP Blade Set
16’, 24’
Packaged UMH Mount
1’, 2’, 4’
AND
ITEMIZED CHECKLIST
OPTIONAL COMPONENT
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING:
• Only qualified electricians are allowed to install the
drive and connections to the motor.
PINK TAG
YELLOW STICKER
ATTENTION!
1. Remove rubber plug prior to start up.
2. Discard rubber plug after removal.
3. Discard pink tag if attached to unit.
3. If yellow sticker is attached to unit, it can remain in place.
!
Fan Control AC Tech VFD
ESV751N02YXB (NEMA1) 230V, 1/3PH INPUT
ESV751N04TXB (NEMA1) 460V, 3PH INPUT
HVLS-ESV751N02YXC (NEMA4) 230V, 1/3PH INPUT
HVLS-ESV751N04TXC (NEMA4) 460V, 3PH INPUT