Installation Instructions

INSTALLATION:
CHANDELIER
TOOLS AND MATERIALS REQUIRED:
SAFETY PRECAUTIONS:
Phillips
Screwdriver
Wire Cutters
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
Pliers Wrench
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Wiring supplies
as required by
the Canadian
Electrical Code
and/or the
Quebec
Electrical code
1. Install the length of rod(s)
that is required by threading wire
through the rod(s) and screwing it
to the fixture.
2. Loosen “B”. Adjust stud to
desired length and lock in place
with “B”. Attach the mounting
bracket to the outlet box using
electrical box screws (not
included).
3. Connect the ground wires
(bare copper or green) from your
fixture to the ground wire (bare
copper or green) or ground screw
in the electrical outlet box.
Attach the black wire (or wire
marked “SPT-1”) from the light
fixture to the black wire in the
electrical box. Attach the white
wire from the light fixture to the
white wire in the electrical box.
Once connections of wires are
completed, carefully tuck wires
and wire nuts into the outlet box
making sure no bare wire (on the
black and white) is visible at the
wire nuts.
4. Tuck electrical wires into
outlet box and position fixture
over studs or nipple on mounting
bracket assembly. Secure fixture
in place with star washer(s) and
cap nut(s).
5. Install proper bulb type and
wattage(not included).
Rod(s)
Canopy
White
Black
House supply
Ground
wire
Fixture
Ground wire
“B”
Outlet Box Screws
(not included)
Outlet
Box
Mounting
Bracket
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) 1-800-567-2513 (French) Monday through Friday 8:00 AM to 5:00 PM E.S.T.
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: [phone], Fax: [phone]
ICH527A03CH16
12 /13
Star
Washer
Cap
Nut
Fixture
Stud
Bulb
Finial
Fibre
Washer
6. Warning: Risk of Shock
Start threading stem into “open
coupling” till stem just appears on
the inside of open coupling.
Be careful not to damage the
wires while installing.
7. Attach the stem to the
fixture. Secure the glass in place
using the fibre washer, hex nut, and
finial.
Hex Nut
Glass
Stem