Installation Sheet

O-27
06/13
SAFETY PRECAUTIONS:
OUTDOOR CEILING
LIGHT
1. COVERED CEILING MOUNT ONLY.
2. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
DO NOT REMOVE INSULATION FROM FIXTURE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION
CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND
THE HAZARDS INVOLVED.
4. FIRMLY ATTACH THE FIXTURE GROUND WIRE (BARE COPPER) TO THE MOUNTING BRACKET WITH THE
GROUND SCREW (BY WRAPPING AROUND THE GROUND SCREW) AND THEN CONNECT IT TO THE
HOUSE SUPPLY GROUND WIRE WITH A WIRE NUT.
NOTE: PRODUCT MAY NOT LOOK EXACTLY AS SHOWN IN FIGURES.
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
3. Once wire connections
are completed, carefully tuck
wires and wire nuts into the
outlet box making sure no
bare wire (on the black and
white) is visible at the wire
nuts. Tuck the electrical
wires into the electrical box
and position the “key slots”
over the support screws.
Turn and lock the support
screws into the “key slots”.
Tighten the support screws
into place.
4. Install the proper bulb
type and wattage (not
included).
1. Install the mounting
bracket to the electrical box
using two electrical box
screws. (Note: Do not adjust
the two support screws at
this time.)
2. Firmly attach the fixture
ground wire (bare copper) to
the mounting bracket with
the ground screw (by
wrapping around the
ground screw) and then
connect it to the house
supply ground wire with a
wire nut. Connect the black
wire (or wire with marking)
from the fixture to the black
wire in the electrical box and
connect the white wire from
the fixture to the white wire
in the electrical box.
Fixture
INSTALLATION:
Fixture
White
Black
House supply
Ground wire
Fixture
Ground wire
TOOLS AND MATERIALS REQUIRED:
!
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: [phone], Fax: [phone]
Blade
Screwdriver
Pliers
Wiring supplies
as required by
the Canadian
Electrical Code
and/or the
Quebec
Electrical code
Electrical
Box
Mounting
Bracket
Electrical
Box Screws
（not included)
Support
Screws
Key Slots