Installation Sheet

L
N
L
N
INSTALL EASY CONNECT MOUNTING BRACKET:
Electrical
Box
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) • 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF
LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
Black (Live)
White
(Neutral)
Green (Ground)
Attach easy connect
mounting bracket
to electrical box with
electrical box screws
(not included).
Connect (push) electrical
wires from electric box
(house wiring) into correct
inserts. Black (Live),
White (Neutral),
Green (Ground)
Easy Connect
mounting
bracket
STEP 1
Connect (push) electrical wires
from fixture into correct inserts.
Black (live), White (neutral),
Green (ground)
For multiple black (live) &
white (neutral) wires joined
in the electrical box
(house wiring), attach a single
“black” and “white” Jumper Wire
before connecting. Strip 7mm
from a 6” Jumper Wires (AWG 12-24)
supplied. Then connect (push) wires
into correct inserts.
STEP 2 - Option 1
EASY CONNECT®
INSTALLATION INSTRUCTIONS
L
N
L
N
Light
Fixture
Jumper Wire
Jumper
Wire
Option 2 - MULTIPLE ELECTRICAL BOX WIRES
STEP 3
STEP 5
CONNECT LIGHT FIXTURE
CONNECT HOUSE WIRES
!
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
EO -1
12/12
STEP 4
Tuck electrical wires into outlet box
and position fixture over studs or
nipple on mounting bracket assembly.
Secure fixture in place with star
washer(s) and cap nut(s).
Note: If required, assemble body and
spread the arms of the fixture out
evenly.
Star
Washer
Stud
Or
Nipple
Cap
Nut
Fixture
STYLE#1
STYLE#2
STEP 6 - Optional for some models ( Note: Refer to the style of assembly that matches the style of your fixture.)
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: [phone], Fax: [phone]
L
N
STYLE #1
STYLE #2
After Installation, seal around the
top and side perimeter between
the fixture and the wall surface
with weather resistant caulking.
The bottom should be left un-caulked
to prevent moisture build-up. Apply a
small amount of weather resistant
caulking around the side perimeter
between the cap nut and mounting plate.
Cap Nut
Wheather
Resistant Caulking
Wheather
Resistant Caulking
STYLE#2 - Install proper bulb type
and wattage.
Unscrew glass cylinder
to install bulb. Screw glass cylinder
back on to the fixture.
STYLE#1 - Install proper bulb type
and wattage. Slide the glass down.
(L)
Black
(Live)
(L)
Black
(Live)
(L)
Black (Live)
(N)
White
(Neutral)
(N)
White
(Neutral)
(N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Green
(Ground)
NOTE: Product May Not Look Exactly As Shown In Figures.