Installation Guide

INSTALL EASY CONNECT MOUNTING BRACKET:
Electrical
Box
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) • 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF
LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
Black
(Live)
White
(Neutral)
Green
(Ground)
Attach easy connect
mounting bracket
to electrical box with
electrical box screws
(not included).
STEP 1
Connect (push) electrical
wires from fixture into
correct inserts.
Black (live), White (neutral),
Green (ground)
EASY CONNECT®
INSTALLATION INSTRUCTIONS
L
N
Light
Fixture
STEP 3
CONNECT LIGHT FIXTURE
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
STEP 4
STEP 5 STEP 6
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: [phone], Fax: [phone]
Electrical
Box Screws
Cover
Back
(not included)
Wood Screw
Additional support may be required
for fixtures longer than 20” . Position
the fixture and add wood screws
(one on each side) for the wooden
studs or plastic wall anchor and wood
screws for dry wall.
L
N
L
N
Connect (push) electrical
wires from electric box
(house wiring) into correct
inserts. Black (Live),
White (Neutral),
Green (Ground)
For multiple black (live) &
white (neutral) wires joined
in the electrical box
(house wiring), attach a single
“black” and “white” Jumper Wire
before connecting. Strip 7mm
from a 6” Jumper Wires (AWG 12-24)
supplied. Then connect (push) wires
into correct inserts.
STEP 2 - Option 1
Jumper Wire
Jumper
Wire
Option 2 - MULTIPLE ELECTRICAL BOX WIRES
CONNECT HOUSE WIRES
(L)
Black
(Live)
(L)
Black
(Live)
(L)
Black (Live)
(N)
White
(Neutral)
(N)
White
(Neutral)
(N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Green
(Ground)
IVL627A02/03/04
10/15
Star
Washer
Fixture
Stud
Cap Nut
Tuck electrical wires into electrical box and
position fixture over studs on mounting
bracket assembly. Secure fixture in place
with star washers and cap nuts.
Remove spinner nut from socket.
Position shade on lamp and secure with
spinner nut.
Install specified bulb type and wattage
(not included).
Spinner
Nut
Shade
Shade
Bulb
Position the decorative ring
onto the shade.
Decorative
ring
NOTE: Product May Not Look Exactly As Shown In Figures.