Instructions / Assembly

INSTALLATION:
IWF639B01
09/19
SAFETY PRECAUTIONS:
NOTE: Product may not look exactly as shown in figures.
Fixture
Option 1
Option 2
Jumper
Wire
Jumper
Wire
Electrical
box screws
3. Connect (push) electrical
wires from fixture into correct
inserts.
4. Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
electrical box making sure no
bare wire (on the black and
white) is visible at the wire nuts.
5. Attach fixture to mounting
bracket by tightening the 2
screws.
6. Remove spinner nuts from
socket. Position the big shade
on lamp and secure with the
big spinner nut. Position the
small shade into the big shade
and secure the small shade
with the small spinner nut.
7. Install proper bulb type
and wattage (not included).
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY
A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
A CLEAN, SOFT CLOTH.
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
Tel: [phone], Fax: [phone]
Black
(Live)
White
(Neutral)
Green
(Ground)
Electrical
Box
L
N
Green
(Ground)
Green
(Ground)
Green
(Ground)
(L)
Black (Live)
(N)
White
(Neutral)
L
N
(L)
Black (Live)
(L)
Black (Live)
(N)
White
(Neutral)
(N)
White (Neutral)
L
N
L
N
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Big
Spinner Nut
Small
Spinner Nut
Bulb
Fixture
Screw
Mounting
Bracket
EASY CONNECT
INSTALLATION INSTRUCTIONS
TM
Easy Connect
mounting
bracket
TM
1. Attach Easy Connect™
mounting bracket to electrical
box with electrical box screws
(not included).
2. Option 1: Connect (push)
electrical wires from electric
box (house wiring) into correct
inserts.
Option 2: For multiple green
(ground), black (live) and
white (neutral) wires joined in
the electrical box (house
wiring), attach a single “green”,
“black” and “white” jumper
wire before connecting. Strip
7mm from the 6” jumper wires
supplied. Then connect (push)
wires into the correct inserts.
Big shade
Small shade