Installation Sheet

4. Remove one screw from
the mounting bracket. Tuck
electrical wires into outlet
box and position fixture over
the mounting bracket. Line
up the screw in the bracket to
the "7" hole on the fixture.
Slide fixture to secure in
place. Insert remaining screw.
Tighten both screws to
secure.
5. Attach the stem to the
fixture. Secure the glass in
place using the fibre washer,
hex nut, and finial.
1. Mount the mounting bracket
to outlet box using outlet box
screws (not included).
2. Connect the ground wires
(bare copper or green) from your
fixture to the ground wire (bare
copper or green) or ground screw
in the electrical outlet box.
Connect the black wire (or wire
with marking) from the fixture to
the black wire in the electrical
box and connect the white wire
from the fixture to the white wire
in the electrical box.
NOTE: Do not disconnect any
pre-wired connections.
3. Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
outlet box making sure no bare
wire is visible at the wire nuts.
INSTALLATION:
LFM-3
11/14
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Wire Cutters
Pliers Wrench
LED FLUSH
MOUNT
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Wiring supplies
as required by
the Canadian
Electrical Code
and/or the
Quebec
Electrical code
Outlet Box
Screws
(not included)
House
supply
Ground
wire
Fixture
Ground wire
White
Black
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-267-4427 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR.
4. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
5. NOT FOR USE IN LUMINAIRES CONTROLLED BY A DIMMER.
NOTE: Product may not look exactly as shown in figures.
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: [phone], Fax: [phone]
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
Screw
Screw
Glass
Hex Nut
Finial
Fibre
washer
Stem
Outlet
Box
Mounting
Bracket