Installation Sheet

ManualsBrandsCanarm ManualsShop All CanarmCanarm LED Mirror 32" x 24" Rectangular Frameless Wall Mounted Mirror - 44 Watt

INSTALLATION:

01/19

MIRROR LIGHT

1. Determine if the mirror is to be fitted portrait or

landscape. Measure the distance (X or Y) between the

hole centers on the back of the mirror.

TOOLS AND MATERIALS REQUIRED:

Phillips

Screwdriver

Wire Cutters

INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS

READ ALL INSTRUCTIONS

IMPORTANT SAFETY

INSTRUCTIONS

SAVE THESE INSTRUCTIONS

SAFETY PRECAUTIONS:

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF THIS FIXTURE.

2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.

3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE

BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE

HAZARDS INVOLVED.

4. ENSURE THE SCREWS AND WALL PLUGS ARE SUITABLE FOR THE WALL INTENDED TO MOUNT THIS

PRODUCT. CONSULT THE QUALIFIED PERSON FOR SAFETY INSTALLATION.

5. CONNECT THE GROUND WIRE (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND

WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.

6. TO CLEAN THE MIRROR, TURN OFF THE POWER, WAIT FOR IT TO COOL. WIPE THE MIRROR WITH A

CLEAN AND SOFT CLOTH.

7. CLEAN GLASS WITH WATER ONLY.

8. REQUIRE AT LEAST 2 PERSONS TO SAFELY INSTALL THIS PRODUCT.

NOTE: Product may not look exactly as shown in figures.

QUESTIONS OR CONCERNS CONTACT AT:

1-800-265-1833 (English) / 1-800-567-2513 (French)

Monday through Friday 8:00 AM to 5:00 PM E.S.T.

Drill

Landscape

Back of the Mirror

Measure

Distance X

(portrait)

Measure

Distance Y

(landscape)

Portrait

Spirit Level

Pencil

Tape

Measure

Summary of content (4 pages)

PAGE 1
MIRROR LIGHT 01/19 QUESTIONS OR CONCERNS CONTACT AT: 1-800-265-1833 (English) / 1-800-567-2513 (French) Monday through Friday 8:00 AM to 5:00 PM E.S.T. TOOLS AND MATERIALS REQUIRED: INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS ! IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS SAFETY PRECAUTIONS: Phillips Screwdriver Pencil Spirit Level Wire Cutters Tape Measure Drill 1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF THIS FIXTURE. 2.
PAGE 2
. Draw a horizontal line on the wall at the desired height. Wall 3. Wall Plug Wood Screw Mark the wall for the pilot hole locations. Drill 3 pilot holes at location. Determine the appropriate way (wood screws for the wooden studs or wall plugs and wood screws for dry wall) of fastening the mirror to the wall. Hole for safety cable 4. Safety Cable Insert the wall screws supplied into the wall plugs.
PAGE 3
LUMIÈRE MIROIR 01/19 QUESTIONS OU INFORMATION COMMUNIQUE AVEC AU: 1-800-265-1833 (Anglais) / 1-800-567-2513 (Français) Du lundi au vendredi entre 8:00H et 17:00H H.N.E. OUTILS ET MATERIAUX REQUIS: INSTRUCTIONS CONCERNANT LE RISQUE ! D’INCENDIES OU LES DOMMAGES CORPORELS LISEZ TOUTES LES INSTRUCTIONS INSTRUCTIONS DE SÛRETÉ IMPORTANTES GARDEZ CES INSTRUCTIONS MISE EN GARDE: Tournevis A Phillips Crayon Coupeur De Fils Ruban À Mesurer Niveau à bulle Perceuse 1.
PAGE 4
Mur 2. Tracez une ligne horizontale sur le mur à la hauteur désirée. 3. Cheville murale Trou pour câble de sécurité Vis à bois Marquez le mur pour les emplacements des trous pilotes. Percez 3 trous pilotes à cet emplacement. Déterminez le meilleur moyen (vis èa bois our montants en bois ou cheville et vis èa bois pour murs secs) de fixer le miroir au mur. 4. Câble de sécurité Insérez les vis murales fournies dans les chevilles.