Instructions / Assembly

ManualsBrandsCANARM ManualsLightingRivo LED Black and Cement Outdoor Hardwired Wall Sconce

LED OUTDOOR

LIGHTING

Phillips

Screwdriver

Wire Cutters

Pliers Wrench

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.

2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE

BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE

HAZARDS INVOLVED.

3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND

WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.

4. NOT FOR USE IN LUMINAIRES CONTROLLED BY A DIMMER.

5. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH

A CLEAN, SOFT CLOTH.

NOTE: Product may not look exactly as shown in figures.

LOL577

10/21

Wiring supplies

as required by

local electrical

code

Screw

1. Remove the mounting

bracket from the fixture by

unscrewing the 2 screws.

2. Mount the mounting

bracket to electrica

l box using

electrica

l box screws (not

included).

3. Connect the ground wires

(bare copper or green) from

your fixture to the ground wire

(bare copper or green) or

ground screw in the electrical

box. Attach the black wire from

the light fixture to the black

wire in the electrical box.

Attach the white wire from the

light fixture to the white wire in

the electrical box.

NOTE: Do not disconnect any

pre-wired connections.

4. Once connections of wires

are completed, carefully tuck

wires and wire nuts into the

electrical box making sure no

bare wire (on the black and

white) is visible at the wire nuts.

5. Re-tighten the two screws

to install the fixture.

6. After Installation, seal

around the top and side

perimeter between the fixture

and the wall surface with

weather resistant caulking. The

bottom should be left

un-caulked to prevent

moisture build-up. Apply a

small amount of weather

resistant caulking around the

side perimeter between the

screw and mounting plate.

Electrical

Box

Electrical Box Screws

(not included)

Mounting

Bracket

Mounting

Bracket

Tel: (613) 342-5424, Fax: (800) 263-4598

Fixture

Weather Resistant

Caulking

(not included)

INSTALLATION:

SAFETY PRECAUTIONS:

TOOLS AND MATERIALS REQUIRED:

White

Black

House

supply

Ground

wire

Fixture

Ground wire

Summary of content (2 pages)

PAGE 1
LED OUTDOOR LIGHTING LOL577 10/21 TOOLS AND MATERIALS REQUIRED: Phillips Screwdriver Wire Cutters Pliers Wrench Wiring supplies as required by local electrical code SAFETY PRECAUTIONS: 1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE. 2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. 3.
PAGE 2
ÉCLAIRAGE EXTÉRIEUR AU DEL INSTRUCTIONS CONCERNANT LE RISQUE D’INCENDIES OU LES DOMMAGES CORPORELS LISEZ TOUTES LES INSTRUCTIONS ! LOL577 10/21 OUTILS ET MATERIAUX REQUIS: INSTRUCTIONS DE SÛRETÉ IMPORTANTES GARDEZ CES INSTRUCTIONS Tournevis Phillips Pinces Fournitures électriques telles Coupeur De Fils que prescrites par les normes locales Clef MISE EN GARDE: 1. FERMER LE COURANT AU DISJONCTEUR AVANT DE DÉBUTER L’INSTALLATION DE LA FIXTURE. 2.