Installation Guide

Phillips
Screwdriver
Wire Cutters
Pliers Wrench
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL BOX.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
A CLEAN, SOFT CLOTH.
NOTE: Product may not look exactly as shown in figures.
LT233A02
LT233A03
LT233A06
10/21
Wiring supplies
as required by
local electrical
code
1. Mount the mounting
bracket to electrica
l box using
electrica
l box screws (not
included).
2. Connect the ground
wires (bare copper or green)
from your fixture to the
ground wire (bare copper or
green) or ground screw in
the electrical box. Attach
the black wire from the light
fixture to the black wire in
the electrical box. Attach
the white wire from the light
fixture to the white wire in
the electrical box.
NOTE: Do not disconnect
any pre-wired connections.
3. Once connections of wires
are completed, carefully tuck
wires and wire nuts into the
electrical box making sure no
bare wire (on the black and
white) is visible at the wire nuts.
4. Attach fixture to mounting
bracket by tightening the 2
screws.
5. Screw the glass shade on to
the fixture. Ensure the glass is
securely attached to the fixture.
Tel: [phone], Fax: [phone]
Electrical
Box
Electrical Box Screws
(not included)
Mounting
Bracket
Mounting
Bracket
Fixture
Fixture
White
Black
House
supply
Ground
wire
Fixture
Ground wire
Glass
Screw
INSTALLATION:
SAFETY PRECAUTIONS:
TOOLS AND MATERIALS REQUIRED:
LED CEILING/WALL
TRACK LIGHTING
dimmable
Model#
MAX rated
wattage
Suitable dimmer
LT233A03
LT233A06
13W
15W
30W
LEVITON# 742-6672-HLW ,
722-6674-PDW MAX 150 W,
Lutron # SCL-153PH-WH MAX 150 W
These LED lights are dimmable:
LT233A02