User manual

Chapter 4: Programming your SEC-HD Phason
34
To program proportional band settings
The examples in the following procedure use program A. Program A displays as
a
pr
, program B displays as
b p r
, program C displays as
C p r
, and so on.
1. Press Program until the program you want to adjust displays, for
example
A pr
for program A.
2. Press Select.
The display shows
Π0
, the first item in the Program menu.
3. Press Up or Down until the setting you want to adjust displays, for
example
Π12
for Stage 5 set point and then press Select.
The display shows the current setting.
4. Press Up or Down to adjust the setting and then press Select.
The control returns to the Program menu.
5. Repeat steps 3 to 4 for each setting you want to adjust.
6. To return to the Main menu, press Back once. To return to the
Main display, press Back twice.
To program stage settings (no proportional band)
The examples in the following procedure use program A and stage 3.
 Program A displays as
a p r
, program B displays as
b p r
, program C displays
as
C p r
, and so on.
 Stage 3 uses Program settings menu item 10. For stage 4, use menu item 11.
For stage 5, use menu item 12.
1. Press Program until the program you want to adjust displays, for
example
A pr
for program A.
2. Press Select.
The display shows
Π0
, the first item in the Program menu.
3. Press Up or Down until the setting you want to adjust displays, for
example
Π10
for Stage 3 set point and then press Select.
The display shows the current setting.
4. Press Up or Down to adjust the setting and then press Select.
The control returns to the Program menu.
5. Repeat steps 3 to 4 for each setting you want to adjust.
6. To return to the Main menu, press Back once. To return to the
Main display, press Back twice.
A pr
Π10
*8‹0
A pr
Π12
*8†0