User manual

Chapter 5: Monitoring and maintaining your SEC-HD Phason
44
Saving and restoring settings
The SEC-HD Saver is an innovative and easy-to-use product that
allows you to store your SEC-HD configuration and settings.
The SEC-HD Saver stores a complete copy of all a SEC-HD's
configuration and settings. You can restore the configuration and
settings any time, or even use them to set up new SEC-HDs in
seconds!
To save your settings
1. Loosen the four screws in the SEC-HD enclosure and then gently
remove the cover. Make sure not to disconnect the ribbon cable.
2. Insert the SEC-HD Saver into the connector marked SAVER on
the inside top-left of the cover.
3. Press Program until
( 0 N f
displays and then press Select.
The display shows
17
, the first item in the Configuration menu.
4. Press Down until
25
displays and then press Select.
5. Press Up or Down to change the
no
to
yes
and then press
Select.
The control saves the information to the SEC-HD Saver. When
complete, the display shows
done
.
6. To return to the Configuration menu, press Back once. To return
to the Main menu, press Back twice. To return to the Main display,
press Back three times.
7. Remove the SEC-HD Saver.
8. Replace the cover and then tighten the four screws.
To restore your settings
1. Loosen the four screws in the SEC-HD enclosure and then gently
remove the cover. Make sure not to disconnect the ribbon cable.
2. Insert the SEC-HD Saver into the connector marked SAVER on
the inside top-left of the cover.
3. Press Program until
( 0 N f
displays and then press Select.
The display shows
17
, the first item in the Configuration menu.
4. Press Down until
26
displays and then press Select.
5. Press Up or Down to change the
no
to
yes
and then press Select.
The control reads the information from the SEC-HD Saver. When
complete, the display shows
done
.
(0Nf
25
* no
(0Nf
26
* no