User manual

SEC-HD user manual Servicing and maintaining your SEC-HD

6. To return to the Configuration menu, press Back once. To return to the Main menu, press Back

twice. To return to the Main display, press Back three times.

7. Remove the SEC-HD Saver.

8. Replace the cover and then tighten the four screws.

Displaying the firmware version, parameter 29

Firmware is similar to operating system software for a computer. Firmware contains instructions

that tell the SEC-HD how it operates. Just like computer operating systems (such as Windows™ 7)

have version numbers, the firmware has a version number. The SEC-HD displays the firmware

version as a number in the format #.##.

If you need to contact Phason Customer Support about your SEC-HD, you might need to provide

them with the firmware version of your control. For more information about technical support, see

the back of the manual.

To display the firmware version

1. Press Program until

(0Nf

displays and then press Select.

The display shows

, the first item in the Configuration menu.

2. Press Down until

displays and then press Select.

The display shows the firmware version.

3. To return to the Configuration menu, press Back once. To return

to the Main menu, press Back twice. To return to the Main display,

press Back three times.

Updating the firmware, parameter 28

The optional SEC-HD Updater is an innovative and easy-to-use product that allows you to upgrade

your SEC-HD's firmware. Phason constantly improves and adds new features to their products.

With the SEC-HD Updater, you can upgrade the firmware in your SEC-HD as these features

become available. The SEC-HD Updater takes only seconds to use and can upgrade all the SEC-HD

controls at your site.

There are two methods for updating the SEC-HD firmware:

 Power on: the power on method allows you to update the SEC-HD firmware using the menu

system, without having to switch the incoming power off and then on. If the power on method

fails, use the power off method.

 Power off: the power off method allows you to update the SEC-HD firmware by switching the

incoming power off and then on.

(0Nf

ƒ00