User manual
Service and technical support
Phason will be happy to answer all technical questions that will help
you use your SEC-HD. Before contacting Phason, check the
following:
Read this manual for information about the feature with which you
are having trouble.
If you see an alarm message and are not sure what it means, look it
up in the Alarm and error messages table on page 51 and then
follow the instructions for resolving the alarm condition.
If you are having a problem using your SEC-HD, look in the
Troubleshooting table on page 52 and then follow the directions
for correcting the problem.
If you still have a problem with your SEC-HD, collect the
following information:
The serial number
Any messages displayed by your SEC-HD
A description of the problem
A description of what you were doing before the problem occurred
Phason controls are designed and manufactured to provide reliable
performance, but they are not guaranteed to be 100 percent free of defects.
Even reliable products can experience occasional failures and the user should
recognize this possibility.
If Phason products are used in a life-support ventilation system where failure
could result in loss or injury, the user should provide adequate back up
ventilation, supplementary natural ventilation, or an independent failure-alarm
system. The user’s lack of such precautions acknowledges their willingness to
accept the risk of such loss or injury.
Phone: 204-233-1400
Fax: 204-233-3252
Phason Inc.
2 Terracon Place
Winnipeg, Manitoba, Canada
R2J 4G7
E-mail: support@phason.ca
Web site: www.phason.ca










