Installation Sheet

CP FAN U-CLAMP KIT
FOR JUNCTION BOX MOUNTING
CP Fan Bracket allows installation of CP fans on an approved Ceiling J Box
R-B-CPUCLAMP
1. Place CLAMP on pulley.
2. Slide METAL BAR over CLAMP.
3. Attach METAL BAR to SPARK PLATE through centre holes. Secure with LOCKNUTS.
4. Feed electrical wires through centre of SPARK PLATE and connect to power supply.
5. Attach METAL BAR and SPARK PLATE to
OUTLET BOX with outlet box screws.
6. Slide up the upper canopy and ax it with the set screws.
Leave a minimum of 1/8” between ceiling and canopy.
CLAMP
METAL BAR
OUTLET BOX
SPARK PLATE
CANOPY
SET SCREWS
PULLEY
CLAMP
METAL BAR
LOCKNUTS
electrical box screw
(not included)
05.2018
R-B-CPUCLAMP
M-CPUCLAMP