Product Manual

Type TS-15 Switch
Installation Instructions
1. UNPACKING
Assemble switch to mounting plate.
2. ELECTRICAL CONNECTIONS
WARNING
High Voltage,
disconnect power
before servicing.
!
WARNING: Be sure power is off at the electrical panel before wiring.
WARNING: All electrical work should be performed by a qualified electrician.
Introduce electrical cables into junction box. Connect wiring to switch terminals according to wiring
diagram below. (Switch ratings are 10A, 250V and 15A, 125V) Screw face plate to junction box.
In order to obtain high speed fan operation with switch toggle in up position, bottom switch
terminal has to be connected to “high” motor terminal.
NOTE:
Junction
Box
Ground
Common
Line
POWER SUPPLY
TWO - SPEED
MOTOR
Low
High
Off
Ground
Common
TWO - SPEED SWITCH
High
Low
WIRING DIAGRAM
M0071 - Rev1-RevDate: 01/11/01 Page1of1