Use Instructions

Page |
44
OR Base Station Unit Specification
Mode of Operation Operational Modes:
Power on (w/self-test)
Normal operating
Fault (self-test failure)
Mode of Operation:
The surgical team uses the OR Base Station System
before and during the TKA surgery to register the patient
and initiate the CTE implant so that it will begin
collecting data after the patient’s surgery. The OR Base
Station System consists of an OR Base Station unit,
dedicated laptop PC loaded with the Canary software
application, barcode scanner, and USB cables.
Recommended Operating Conditions Temperature: +5°C to +40°C;
Relative Humidity: 15% to 93% (non-condensing).
Safe Storage and Transport Temperature
Range
Storage: 15° C to 25° C
Transportation Environment: Per ISTA 3A, method
ASTM D4332.
Safe Storage and Transport Relative Humidity Storage: 10% to 90% (noncondensing).
Transportation Environment: 10% to 95%
(noncondensing).
Protection from Electric Shock Per IEC 60601-1-11, clause 10.1.3 b
Protection from Ingress of Liquids Per IEC-60529, OR base station rated as IP21.
Audible Output Levels None. (Not applicable.)
Physician Instructions for Use
DRAFT