Manualshelf

Instructions / Assembly

ManualsBrandsCanary Products ManualsElectric FireplacesXBrand 11.22 in. W Electric Standing Portable Heat Wired Fire Stove with Control and LED Flame Effect in Black
12345678
5
ASSEMBLY
ALWAYS make sure the unit is unplugged before beginning assembly! NEVER move or
clean the heater, or change the bulb(s), while it is plugged in.
1) Carefully turn the STOVE (A) upside down and lay it on a clean soft surface.
2) Align the holes in the leg (B) with the holes in the corner of the stove frame as shown.
3) Thread three SCREWS (C) through the holes in the leg and into the stove frame. Partially
tighten the screws with a Phillips screwdriver.
4) Repeat Steps 2 and 3 for the other three legs.
5) Check the alignment and tighten all 12 screws securely with the screwdriver.
DO NOT over-tighten the screws.
ALWAYS attach the feet before using! NEVER plug in or operate this unit if the feet are
not securely attached!