Manualshelf

Instructions / Assembly

ManualsBrandsCanary Products ManualsElectric FireplacesXBrand 11.22 in. W Electric Standing Portable Heat Wired Fire Stove with Control and LED Flame Effect in Black
12345678
6
OPERATION
NOTICE
When the heat function is used for the first time, a slight odor may be present. This
is normal and should not occur again unless the heater is not used for an extended
period of time.
BUTTON
ACTION / FUNCTION
INDICATION / RESULT
Power
1. Press to turn on flame effect and
enable heater.
Heater switches will not work unless
this switch is turned on.
2. Press again to shut off the power to
all functions.
1. Flame effect turns on. Power light on switch
illuminates.
The heater is now enabled.
2. Flame effect, heater, and power lights all turn
off.
I
1. With power turned on, press to turn
on low heat.
Low heat must be on to use high heat.
2. Press again to turn off low heat.
1. Heater and fan turn on low.
2. Low heat and fan turn off. Flame stays on.
II
1. With power and low heat turned on,
press to turn on high heat.
2. Press again to turn off high heat.
1. Heater and fan turn on high.
2. High heat and fan turn off. Low heat and
flame stay on.
TEMPERATURE LIMITING CONTROL
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe
temperature, the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the CONTROL PANEL to OFF.
3. Wait 5 minutes.
4. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are,
use a vacuum to clean the vent areas.
5. With the POWER switch OFF, plug the power cord back into the outlet.
6. If the problem continues, have your outlet and wiring inspected by a professional.
CARE AND MAINTENANCE
Replacing the light bulb
ALWAYS turn the heater OFF and unplug the power cord from the outlet before
changing the bulb. Failure to do so could result in electric shock, or personal injury.