User's Manual

USER MANUAL

CSP-COM

86338_A

13 / 26

CANBERRA Industries

800 Research Parkway

MERIDEN, CT 06450

4. USE OF THE MODULE

4.1. COMMUNICATION MODE

Whether for the CSP-COM using wireless communication mode (Blue tooth & Wifi) or whether for the

ones using cable mode (Ethernet & RS485), the necessary interfaces (e.g.: Wifi or Ethernet network)

need to be provided by the user to ensure an efficient communication.

4.2. CSP-COM/RF915 PARTICULAR CASE

The CSP-COM/RF915 needs the use of a complementary device added to the PC equipped with

the acquisition software.

This device is a Supervisor/Repeater module. The Supervisor/Repeater (code 86289) modules relay

information between the host computer and the CSP-COM devices deployed in the field. To extend the

communication range of the system, additional Repeater modules may be inserted between the

computer and Supervisor module.

Refer to Chapter

5 for instructions about its installation and use.

4.3. ASSEMBLY OF THE CSP-COM WITH THE PROBE

A fastening kit compatible with all the CSP probes is delivered with the CSP-COM.

It is made of:

− 1 nut (1)

− 1 two-pieces ring (2) and one adaptor ring (3).

There are two kinds of probe, one with locking connector and the other with non-locking connector

This kit allows to connect these two kinds of probe.